Membranes
RO membranes for the treatment of desalination brackish water with TDS less than 5000mg/L Whose source is surface water, ground water or others. The membrane has a high salt rejection rate (98%) with higher flow. Consistent performance quality leads to lesser maintenance expense on resin, EDI and devices.
Product range:
· BW Brackish Water Desalination (4 & 8 inches RO membrane Element)
· LP Brackish Water Desalination (4 & 8 inches RO membrane Element)
· BW Brackish Water Plus RO Membranes (4 & 8 inches RO membrane Element)
Product Description
· Reverse osmosis (RO) elements offer the highest quality water for small commercial systems.
· Membranes are available in a variety of sizes to meet a wide range of space requirements.TW30xLE-3020-600, TW30xLE-3020-1000 have been widely used
in commercial drinking water plant.
· Extra low energy elements operate at the lowest pressure in the industry, resulting in lower energy costs and enabling system builders to use lower cost
components.
· In addition to the highest quality water and the lowest energy costs, membranes also deliver saving by providing the industry's longest lasting and most reliable performance.
UF Membrane
Ultrafiltration (UF) is a separation process using membranes with pore sizes in the range of 0.1 to 0.001 micron. UF membranes removes high molecular – weight substances, colloidal materials, and organic and inorganic polymeric molecules. Low applied pressures are therefore sufficient to achieve high flux rates from Ultrafiltration membrane.
· Wide range of MWCO - 50,000 - 1,00,000
· Capacity range 200 LPH to 400 LPH
· Applicable for pre & post treatment for Municipal & Industrial & Wastewater.
